In windows vista there is a disk utility which checks your hard disk for error, bad sectors and recover information. You can troubleshoot your hard disk in windows vista. this is useful vista guide to check your hard disk.
In order to check a disk in Windows Vista, go to my computer and select the drive you want to check right-click on the disk and choose Properties as shown in below snap.
On the Properties page, click the Tools tab and click Check Now.
Select the options automatically fix file system error and Scan for and attempt recovery of bad sectors checkboxes and click Start.
You cannot check the disk while it is in use. Windows vista perform disk check when in restart by choosing Schedule disk check.
Upon restart, you will see following screen which indicate that disk is checked for errors and repaired if needed.
Vista guide how to use disk utility
how to connect or network windows vista and windows xp
now windows vista on his way and windows xp network is already established. so few vista network problems like vista not recognizing xp on home network. Or may be you installed new microsoft vista and want to add microsoft vista to xp network or looking for help how to connect vista on network with xp.
how to connect or network windows vista and windows xp
In windows vista network setting menu is in the start bar by default and easily available for simple user and easy to configure.
In the start bar find Network option.
Then select “Networking and Sharing Centre”
Here you can configure network, manage settings for network, add Computers to Your Network and Repair Connections. This is simple compare to windows xp.
Networking between XP and Vista
Many time windows vista and windows xp in a same network but both machine are not able to see each other. Main reason is windows vista automatically takes name of network as “workgroup” and in windows xp default name is “mshome”. If you make sure that both computer have same network name.
You can change the network name in windows xp by right click on my computer
Choose property
Then select computer name option
Then at the bottom workgroup name give the name what ever you like and
Apply and then ok
You need to restart your windows xp system to apply changes.
To change network name in windows vista
Right click on my computer and then property
Systems many, select change setting
It will pop up computer name, change the workgroup name.
And apply and ok
Vista tips for Printer Sharing
There may be only one pc for group of computer. And you would like to share printer for entire office or may be you want to give temporary printer access for some Windows Vista user. For this you have to do windows vista printer sharing. This Vista tips will guide you steps for printer sharing for windows vista workgroup.
To share a printer within a workgroup, enable printer sharing on the host PC (where printer cable connected). After enabling printer sharing it allow other network pc to see the shared printer. Open the windows vista Control Panel by clicking on the Start Menu > Control Panel:
Then, click View Network Status and Tasks:
If printer sharing is disabled, click the button next to Printer Sharing, then Turn on Printer Sharing and click Apply:
Printer sharing is now enabled on the windows vista host computer, allowing access to the connected printers.
now go the pc where you want to share your printer, now go to network neighborhood and find the pc where printer is connected. Once you have found the shared printer you wish to use, right click on it and select Connect
Sometime it asks for username and password from host computer to allow access for other computer. Enter username and password for windows vista. Now vista install required driver and add access to the shared printer.
Windows Vista should now install the required drivers and add access to the shared printer, allowing you to print from any application.
This Windows vista tips for printer sharing work on workgroup base Network.
Vista Tips to Recover Deleted Files
Each post has new windows vista tips. In this post I Explained how to recover deleted files from windows vista.
Windows vista System Restore makes it possible to roll back important system files to previous dates. But it is also possible to restore single file or documents those are deleted or modified. System restore point automatically generates everyday.
now make sure system restore is enabled. Now go to the folder where file was saved. Now right click in is and choose the tab Restore Previous Versions as shown in the figure.
It loads Folder Properties with a list of previous saved versions of the folder. As shown in the figure it has 1 restore point. If more than one vista restore point that select 1 by clicking it.
You have three options to access the old files - either Open, Copy or Restore.
• Open allows you to browse the archive of the folder from the restore date, letting you drag and drop any number of files out of the archive (probably the easiest method).
• Copy will prompt you to select a destination folder to copy all of the backup archive to. This is useful if you want to restore the entire folder to a new location.
• Restore will overwrite the currently selected folder with all the files from the restore point (overwriting any modifications). Only use this if you are aware any file since this restore date will be overwritten.
this Windows vista tip help to recover your deleted files
Delete the recycle bin folder at DOS level
Delete the recycled directories (each partition has its own recycled directory) Export [HKLM\Software\Microsoft\Windows\CurrentVersion\explorer\BitBucket] when the bin is empty,
and import it after deleting the directories (contains the # of files in the bin) Export
USER\Software\Classes\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\DefaultIcon] when
the bin is empty, and import it after deleting the directories (controls which icon [full/empty bin] is
displayed) Note: I used to delete the recycled directories under Windows 98. I do not know whether it works or not under Windows 2000 and XP.
